<?xml version="1.0" encoding="UTF-8"?><!-- generator="wordpress/2.1.2" -->
<rss version="0.92">
<channel>
	<title>Konsultasi dan Bimbingan Teknik Elektro</title>
	<link>http://elektro.orgfree.com</link>
	<description>Artikel dan Proyek Pengembangan Bidang Teknik Elektro</description>
	<lastBuildDate>Fri, 19 Sep 2008 06:47:47 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	
	<item>
		<title>1.2 - 15V/3A adjustable regulated power supply</title>
		<description>
Anda membutuhkan rangkaian regulator power supply yang dapat diatur output tegangannya mulai dari 1.2 to 15 V @ 3 A? Anda dapat mencoba rangkaian yang ada pada tulisan ini.  It uses Low Dropout Positive Regulator LM1084 in TO220 package for delivering variable output voltage...
 </description>
		<link>http://elektro.orgfree.com/?p=22</link>
			</item>
	<item>
		<title>Pengendalian Peralatan dengan Remote Kontrol Infra Merah</title>
		<description>
ivica.novakovic writes:
Turn ON or OFF electrical devices using remote control is not a new idea and you can find so many different devices doing that very well. For realization of this type of device, you must make a receiver, a transmitter and understand their way of communication. Here you will ...</description>
		<link>http://elektro.orgfree.com/?p=21</link>
			</item>
	<item>
		<title>Economy radar detector</title>
		<description>
 This circuit uses a 1458 dual op-amp to form a radar          detector. C1 is the detector of the radar signal. The first op-amp forms          a current-to-voltage converter and the second op-amp buffers ...</description>
		<link>http://elektro.orgfree.com/?p=19</link>
			</item>
	<item>
		<title>12-way Input/Output Interface</title>
		<description>This interface is designed for use with a three axis robot arm    based on stepper motors out of 5 1/4" drives. The circuit uses two ULN2803    'drivers' controlled by logic ICs to allow mutliple lines to be controlled at    the same ...</description>
		<link>http://elektro.orgfree.com/?p=18</link>
			</item>
	<item>
		<title>Lampu Disko dengan Kontrol Bass Berbasis PIC16F84A</title>
		<description> This is an early picture of  					my discolight effect. Because of the AGC circuit theres no  					need for potentionmeters for sensitivity adjust. I replaced  					them with trimmers. Now the microphone is on the control  					electronics because theres no need to place it outside the  					box ...</description>
		<link>http://elektro.orgfree.com/?p=15</link>
			</item>
</channel>
</rss>
